Acro Props & Spans

Products / Acro Props & Spans

Acro Props

MINITEK Infrastructures' acro props and spans are available on munufacturing for construction of residential, commercial and industrial sites. Props are manufactured by pipes, starts from 1 Mts - 1.75 Mts, 2 Mts - 3.75 Mts, 3 Mts - 4.75 Mts

Sample Acro Prop

Acro props provide the ideal and the most economic method of support for all kinds of framework, slabs, beams, walls & columns. They are also invaluable for a wide variety of applications in general building construction and repair work. Props eliminate the costly labour and time consumer in cutting timber to length, wedging and nailing when used in the vertical as a prop.



Unique Features

  • The high tensile steel pin is located through a slot in the outer secton and a hole on the inner section for coarse adjustment.
  • The cast collar located below the pin gives fine adjustmentfor lending and striking.
  • A self cleaning device on the collar nut, which automatically clears the thread of concrete and dirt where the nut is rotated thus assuring quick and easy adjustment.
  • A hole boss on the collar nut which makes it easy to turn in confined spaces. By inserting bar in the hole.
  • Base plates and head plates are holed for use with slab from work.
  • TPI ACME square thread ensure load bearing strength at this critical point.
  • Standard special shores pins are also available on request.
  • Beam type or U-head props are also available according to customer's requirement.

  • Acro Spans

    Acro spans are manufactured out of MS sheet, lattices of 10 mm dia bar, main bar 14 mm dia, bearing angle 75 x 75 x 10 mm, one number of eye bolt with additional angle stiffener welded to the sheet and bearing angle from inside.

    Sample Acro Span

    Note: No intermediate support to be provided under spans.



    Sample Acro Prop
     












    Sample Acro Span



    Acro Prop

    Acro Prop

    Acro Prop

     





    Acro Span

    Acro Span

    Acro Span